The 789 is the ultimate troubleshooting tool for electricians and instrumentation professionals, combining the functionality of a loop calibrator with the power of a digital multimeter.
Safety rated multimeters with mA source. Now process technicians can do a lot more while carrying a lot less. The ultimate loop calibration multimeter - the Fluke 789 ProcessMeter. The Fluke 789 ProcessMeter was the first tool to combine a loop calibrator with a DMM to give process technicians double the power in one tool.
Features
- Source and simulate 4 to 20 mA signals
- Simultaneous mA & % of scale readout
- CAT IV 600V safety rated 1000V, 440mA true RMS digital multimeter
- Large dual backlit display
- HART mode setting with loop power provides built-in 250Ω resistor
- Frequency measurement up to 20 kHz
- Min/Max/Average/Hold/Relative modes
- Diode test and continuity beeper
- 0% & 100% buttons to toggle between 4 & 20mA sourcing for quick span checks
- Manual step (100%, 25%, coarse & fine) plus auto step and auto ramp
Current Measurement
Range: 0 to 1A AC or DC
Resolution: 1mA
Accuracy: 0.2% + 2 LSD (DC)
Range: 0 to 30mA
Resolution: 0.001 mA
Accuracy: 0.05% + 2 lSD
Current Sourcing
Range: 0 to 20mA or 4 to 20mA
Resolution: 0.05% of span
Drive Capability: 24V Compliance or 1200Ω at 20mA
Voltage Measurement
Range: 0 to 1000V AC (True-RMS) or DC
Resolution: 0.1mV to 1.0V
Accuracy: 0.1% rdg + 1 LSD (V DC)
Electrical Specifications
Frequency: To 19.999kHz, 0.005% + 1 LSD
Continuity: Beeps for resistance < 100Ω
Resistance Measurement: To 40MΩ, 0.2% + 1 LSD
Diode Test: 2.0V shoes diode voltage drop